Siemens LME71 Series

80/116
Smart Infrastructure Basic Documentation LME7... CC1P7105en
13 Operation via AZL2 24.07.2020
13.8.2 Changing the heating engineer's password

Note:
For the OEM to change the heating engineer’s password, c: demands entry of the OEM
password!
V
SD
AF
>1 s
Press button combination
V
SD
AF
to display
000: Int.
Pressing the
/
reset
button takes you to parameter
041 heating engineer's password.
Parameter 041: blinks.
Press
/
reset
to go to level c: for password
changes.
/
reset
Letter c: for confirmation appears blinking.
Proceed as described in section Entering the
password and enter the former password.
After entry of the last character, the password
must be confirmed by pressing
/
reset
.
/
reset
Letter n: for new appears blinking.
Proceed as described in section Entering the
password and enter the new password (4
characters).
After entry of the last character, the password
must be confirmed by pressing
/
reset
.
/
reset
Letter r: for repeat appears blinking.
Proceed as described in section Entering the
password and repeat entry of the new password.
After entry of the last character, the password
must be confirmed by pressing
/
reset
.
7782z98/0416
SEt confirms that the new password has been
saved.