Siemens M20 Terminal User Manual

AT command interface
Version 8 dated 15.03.00 127
Siemens Information and Communication Products
A
Test command
AT^SPLM=?
Response
OK
Parameter
Execute command
AT^SPLM
Response
TA returns the list of operator names from the ME. Each operator code <numericn> that has an
alphanumeric equivalent <alphan> in the ME memory is returned.
^SPLM: numeric <numeric1>,long alphanumeric
<alpha1><CR><LF>
^SPLM:.....OK
Parameter
<numericn> string type; operator in numeric form; GSM location area identification num-
ber
<alphan> string type; operator in long alphanumeric format; can contain up to 16 cha-
racters
Reference
GSM 07.07: +CO-
PN, +COPS
Note
AT^SPLR Read entry from the preferred operator list
Test command
AT^SPLR=?
Response
TA returns the whole index range supported by the SIM.
^SPLR (list of supported <index>s) OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
see execute command
Execute command
AT^SPLR=
<index1>
[,<index2>]
Response
TA returns used entries from the SIM list of preferred operators with <index> between <index1>
and <index2>. If <index2> is not given, only entry with <index1> is returned.
^SPLR: <index1>, numeric <oper>
^SPLR: ...
^SPLR: <index2>, numeric <oper> OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<index1> location number to read from
<index2> location number to read to (default: <index1>)
<oper> string type; operator in numeric format; GSM location area identification number
<index> location number
Reference
GSM 07.07,
AT+CPOL
Note:

Siemens M20 Terminal Specifications

General

Brand	Siemens
Model	M20 Terminal
Category	Engine
Language	English