EasyManuals Logo

Siemens M20 Terminal User Manual

Siemens M20 Terminal
234 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #170 background imageLoading...
Page #170 background image
Application notes
Version 8 dated 15.03.00 170
Siemens Information and Communication Products
A
8.2.10 SMS with M20 to SIM (in text mode)
8.2.10.1 Service centre number
The number of the SC (service center) is provider specific. "A1" and "MAX" are the 2 Austrian network providers.
8.2.10.2 Text mode
8.2.10.3 Send SMS
8.2.10.4 Send SMS to e-mail address
8.2.10.5 Send SMS to fax address
NO CARRIER Your partner has hung up
ath To end the connection before your partner
at+csca? Ask for current SC number
+CSCA: “+43676021” At the moment connected with SC of Max Mobil
OK
at+csca=”+436640501” Enter SC number of SIM card (e.g. A1) used at the moment
OK
at+cmgf? Ask whether the text (1) or PDU (0) mode is used
+CMGF:1 Text mode used
OK
Otherwise change with:
at+cmgf=1
OK
at+cmgs=”+436642254766” Enter phone number, afterwards: enter
> text of your SMS Text not longer than..., afterwards: CTRL Z (!)
+cmgs: 27 Counts the messages sent with the SIM card
OK
Enter: ESC to break off the SMS anywhere in the text, without sen-
ding it
OK
e.g. with A1:
at+cmgs=”+43664051” Enter number depending on the network used, afterwards: enter
>Andrea.Schmidt@siemens.at (re-
ference) text of your SMS
You have to write (...), afterwards: CTRL Z (!)
+cmgs: 28 Counts the messages sent with the SIM card
OK
NOTE
: A1 will send you a SMS confirming that your SMS was
forwarded to the e-mail address
e.g. with Max Mobil
at+cmgs=”676201170755009” 6762 (Max Mobil), 01 (Vienna), 1707 (Siemens)
> text of your SMS afterwards: CTRL Z (!)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens M20 Terminal and is the answer not in the manual?

Siemens M20 Terminal Specifications

General IconGeneral
BrandSiemens
ModelM20 Terminal
CategoryEngine
LanguageEnglish

Related product manuals