AT command interface
Version 8 dated 15.03.00 99
Siemens Information and Communication Products
A
<pid> GSM 03.40 TP-Protocol-Identifier in integer format (default 0)
<ra> GSM 03.40 TP-Recipient-Address Address-Value field in string format; BCD num-
bers (or GSM default alphabet characters) are converted to characters of the currently
selected TE character set (refer command
AT+CSCS Select TE character set.); type of
address given by <tora>
<sca> GSM 04.11 RP SC address Address-Value field in string format; BCD numbers (or
GSM default alphabet characters) are converted to characters of the currently selec-
ted TE character set (refer command
AT+CSCS Select TE character set.); type of
address given by <tosca>
<scts> GSM 03.40 TP-Service-Centre-Time-Stamp in time-string format (refer <dt>)
<sn> GSM 03.41 CBM Serial Number in integer format
<st> GSM 03.40 TP-Status in integer format
<toda> GSM 04.11 TP-Destination-Address Type-of-Address octet in integer format (when
first character of <da> is + (IRA 43) default is 145, otherwise default is 129)
<tooa> GSM 04.11 TP-Originating-Address Type-of-Address octet in integer format (de-
fault refer<toda>)
<tora> GSM 04.11 TP-Recipient-Address Type-of-Address octet in integer format (default
refer<toda>)
<tosca> GSM 04.11 RP SC address Type-of-Address octet in integer format (default refer
<toda>)
<vp> depending on SMS-SUBMIT <fo> setting: GSM 03.40 TP-Validity-Period either in
integer format (default 167) or in time-string format (refer <dt>)
Reference
GSM 07.05
Note
To Next Page
Loading...
