Siemens MICROMASTER 430 - Figure 3-4 Basic Operation with SDP

3 Commissioning
MICROMASTER 430 Operating Instructions
36 6SE6400-5AC00-0BP0
Basic operation with SDP
With the SDP fitted, the following is possible:
Ø Start and stopping the motor (DIN1 via external switch)
Ø Fault Reset (DIN3 via external switch)
Controlling the speed of the motor is accomplished by connecting the analog inputs
as shown in the Figure 3-4.
Figure 3-4 Basic operation with SDP
www.eltra-trade.com
+421 552 601 099
info@eltra-trade.com