Siemens MicroSAM User Manual

Glossary
MicroSAM
118 Operating Instructions, 06/2012, C79000-G5376-C560-07
Time for the cut
3
3
3
3
The pressure P2 is set a little lower than
pressure P3.
The result:
- the components are flushed into the
atmosphere as soon as they leave the first
column.
Since the pressure on the left of the coupling
capillary is lower than that on the right, the
gas present in the first column is transported
to the cut output!

Siemens MicroSAM Specifications

General

Brand	Siemens
Model	MicroSAM
Category	Measuring Instruments
Language	English