Siemens NXAIR - Page 106

Assembling the panels
106 NXAIR / ≤ 40 kA 110-0084.9 / 15
Mounting the fan box
NOTICE
Wind vane in the fan box
The wind vane might be damaged during installation of the fan.
Disconnect the connection cables carefully.
Insert the fan box in the front area of the pressure relief duct.
Fig. 137: Fan box position
Bolt the fan box together with the pressure relief duct using 6 bolts M8x20.
Fig. 138: View from above into the fan box
(1)
Wind vane