Preparing installation
110-0084.9 / 15 NXAIR / ≤ 40 kA 15
5.7 Intermediate storage
Fire risk
Transport units are packed in flammable materials.
Keep fire extinguishers in a weatherproof place.
Mark the location of the fire extinguisher.
Transport units falling over
Danger due to transport units falling over, or parts falling down if the storage space
is overloaded.
Observe the load-bearing capacity of the floor.
Do not stack the transport units.
Overloading
While loading and unloading the means of transport and while moving the transport
units, there is risk of overloading the human body.
Use appropriate lifting equipment and floor conveyors.
At the place of installation, observe the valid limit values for lifting and
carrying.
Do not move transport units with bodily power.
Put on personal protective equipment.
Effectiveness of the desiccants
Supplied desiccant bags lose their effectiveness if they are not stored in the
undamaged original packings.
Do not damage or remove packing of desiccant bags.
Do not unpack desiccant bags before use.
If the delivered panels or parts thereof have to be stored before installation, a suitable storage room or place
has to be selected and prepared.
No condensation shall be possible in a suitable storage room; if necessary, air conditioning or heating systems
should be installed to avoid condensation.
To Next Page
Loading...
