Siemens NXAIR - Interlocks; Mechanical Interlocks in Panel Versions with Withdrawable Parts

Unloading and erection
110-0084.9 / 15 NXAIR / ≤ 40 kA 29
6.4 Center of gravity of the panel
On the packing of each panel, at the front and on the right and left sides, the position of the center of gravity is
marked. The position of the center of gravity is marked with the following symbol:
Fig. 20: Symbol for center of gravity
The position of the center of gravity of a panel depends on the panel version.
Fig. 21: Position of the center of gravity, for example for a circuit-breaker panel width of
800 mm
Fig. 22: Position of the center of gravity, for example for a contactor panel width of 435 mm
(1)
630 mm
(2)
400 mm
(3)
980 mm
(1)
390 mm
(2)
145 mm
(3)
560 mm