Accessing the connection compartment through the front
110-0084.9 / 15 NXAIR / ≤ 40 kA 133
8.5 Accessing the connection compartment through the switching-device compartment at panel
versions with voltage transformer compartment
Sharp-edged sheets
The metal parts of the voltage transformer compartment and vertical partition may
have sharp edges. Sharp-edged sheets inside the switchgear can cause injuries by
getting cut and damage cables.
Put on personal protective equipment (e.g. cut-resistant gloves and arm
sleeves).
When working inside the switchgear, it must be observed that cables do not
touch any sharp-edged sheets. Cover sharp-edged spots, if required.
High weight
The voltage transformer compartment is heavy.
The voltage transformer compartment must absolutely be lifted by
2 persons.
Put on personal protective equipment.
Preconditions
• Preparations as described in chapter 8.1 completed
• Door to voltage transformer compartment open
• Removable voltage transformers removed from panel
To Next Page
Loading...
