Siemens NXAIR - Page 134

Accessing the connection compartment through the front
134 NXAIR / ≤ 40 kA 110-0084.9 / 15
Procedure
Remove the connecting elements from the front of the labyrinth, and store them:
• 2 nuts M8 with contact washers
Fig. 192: 2 bolted joints at the labyrinth, front
Remove the connecting elements from the top side of the labyrinth, and store them:
• 11 bolts M8x16 with contact washers and plain washers
Fig. 193: 11 bolted joints at the labyrinth, top side
Remove the labyrinth, and store it.