Accessing the connection compartment through the front
110-0084.9 / 15 NXAIR / ≤ 40 kA 127
Fig. 178: 2 links on panel base
Fig. 179: Correct position of link
Remove the connecting elements (2) from the protection plate of the switching-device
compartment (1), and store them:
• 4 nuts M8 with contact washers
Remove the protection plate of the switching-device compartment (1) from the switching-
device compartment, and store it.
Fig. 180: 4 bolted joints on protection plate of switching-device compartment
Remove the connecting elements from the partition to the connection compartment (3), and
store them:
• 10 bolts M8x20 with contact washers and plain washers (4)
• 5 bolts M8x20 with contact washers (5)
Remove the partition (3), and store it.
To Next Page
Loading...
