Siemens NXAIR - Overview of Panel Types

Preparing installation
110-0084.9 / 15 NXAIR / ≤ 40 kA 21
Version with fixing on double floor
Fig. 9: Fixing on double floor
(1)
Upper edge of double floor
(4)
Substructure
(2)
Hexagon head bolt ISO 4017 – M10 – 8.8
Washer ISO 7093-1 - 10 - 200 HV
Hexagon nut ISO 4032 – M10 – 8
(5)
Supporting profile
(e.g. profile 70 x 40 x 2)
(3)
Base frame of panel
(6)
Floor plate (approx. 36 mm thick)
Floor fixing plate
NOTICE
Damages due to corrosion
Welded seams are susceptible to corrosion.
After welding, protect the welded seams professionally against corrosion.
Fig. 10: Side view of the fixing plate