Siemens PCS 7 - Setting the User Language (MUI)

Requirements for defining user roles with SIMATIC Logon
● SIMATIC Logon is installed on every PC with a PCS 7 application.
● The group "Logon_Administrator" is created on one PC (logon computer).
Information on the next steps
● You will find instructions on how to use SIMATIC Logon to set-up user roles and assign
them to the defined Windows user groups in the manual
SIMATIC; SIMATIC Logon .
● You will find information on the additional settings you need to make in the documentation
relating to the applications that use SIMATIC Logon for access management purposes.
Additional information
● Manual SIMATIC; SIMATIC Logon
5.7.4 Setting the user language (MUI)
Introduction
To work with PCS 7 optimally, we recommend that you make all the language settings to meet
the needs for the specific system.
In PCS 7 you can set the interface language to one of the following for the engineering system
and for process mode (depending on the languages installed):
● Chinese
● German
● English
● French
● Italian
● Spanish
Requirement
An operating system with a multilanguage user interface is installed.
Note
When installing the central archive server and StoragePlus, set the same language for the
logged on user and the default user.
Installing PC stations
5.7 Preparing PC stations
PCS 7 - PC Configuration (V8.2)
106 Installation Manual, 03/2016, A5E36200050-AB