You can prevent the removal of language packages as follows:
● Add all languages to be retained to at least one user in the language list.
● Disable the task LPRemove (Language Pack Removal Task) in Computer Management >
Task Scheduler.
This setting may change with an operating system update.
– Default setting for LPRemove with PCS 7 Bundle PC station:
LPRemove disabled
– Default setting for LPRemove after installation of the operating systems:
LPRemove enabled
Additional information
You can find additional information about performing LPRemove on the web pages of the
operating system manufacturer:
5.3.9 How to install service packs for the operating system
Introduction
If you installed the operating system without a service pack, you will need to install the service
pack before continuing.
Versions
Note
The version you need is listed in the
Process Control System
PCS 7; PCS 7 Readme
file (see
"Preface (Page 9)").
Requirement
Only install service packs, if you can reboot the PC station. A service pack may reboot the PC
station automatically or you may have to reboot to use the modified function.
Procedure
1. Install the service pack.
2. Recommendation: Perform a reboot of the PC station after installation of the service pack.
Additional information
● Section "Installing security patches, hotfixes, service packs (Page 122)"
Installing PC stations
5.3 Installing the operating system
PCS 7 - PC Configuration (V8.2)
Installation Manual, 03/2016, A5E36200050-AB 69
To Next Page
Loading...
