3. Activate the following option: "Microsoft Message Queue Server Core Components".
– Deactivate the subcomponents.
4. Confirm with "OK".
Procedure for Windows Server 2008 R2 / Windows Server 2012 R2 R2
1. Use the search box in the start menu to open the "Server Manager".
2. Select the "Message Queuing" component in the "Features" area.
3. Activate the following there:
– for Windows Server 2008 R2: The options "Message Queuing Services" > "Message
Queuing Server"
– for Windows Server 2012 R2: The options "Message Queuing Services" > "Message
Queuing Server".
Checking the Message Queuing Service
Check in the event log to ensure that the Message Queuing Services have been activated
correctly:
1. Use the search box in the start menu to open the "Event View".
2. In the tree view, select "Event Viewer > Application and Services Logs".
The Message Queuing Service has been installed correctly if the "Source" column contains
the entry "MSMQ".
Incorrect function
If an error message appears under "Description" in the "Event Properties" dialog box, the
installation has not been executed correctly. Remove and then reinstall "Message Queuing
Services".
5.3.7 How to configure the Microsoft Internet Information Service (IIS) for the server
Introduction
The Internet Information Service (IIS) is required to install and use the following PCS 7 PC
stations:
● PCS 7 Web server
● Information Server
● PC station where BATCH archives are stored.
● PDM Server
Deactivate the service for all other installations.
Installing PC stations
5.3 Installing the operating system
PCS 7 - PC Configuration (V8.2)
66 Installation Manual, 03/2016, A5E36200050-AB
To Next Page
Loading...
