5.3.14 Installing additional services for SIMATIC BATCH
Introduction
If you want to transfer SIMATIC BATCH archives using FTP, then additional installations are
required on the PC stations.
Additional services to be installed
PC station Service or software that needs to
be installed
PC station to which the BATCH archives are transferred IIS service
FTP service
PC station from which the transfer of BATCH archives will be acti‐
vated
FTP service
PC station from which the transferred BATCH archives will be ac‐
cessed
BATCH Control Center
(BatchCC)
Additional information
● You can find additional information on configuring services in the manual
Process Control
System PCS 7; SIMATIC BATCH
.
5.3.15 Creating a backup
Recommendation
After restarting and testing the installation, create a backup of the partitions on which the
operating system/PCS 7 software is installed.
We recommend creating an image of the installation for backing up partitions and hard drive
data. An image allows you to restore partition and hard drive data at any time or to prepare
the PC for a software reinstallation.
Note
Please be aware that the license keys cannot and may not be included in the backup.
● Move the license keys to another medium (license key USB stick, partition etc.) before
creating the image.
● In selecting image software, ensure that it is suitable for the operating system in use.
● To create an image, follow the image software manufacturer's instructions.
Installing PC stations
5.3 Installing the operating system
PCS 7 - PC Configuration (V8.2)
72 Installation Manual, 03/2016, A5E36200050-AB
To Next Page
Loading...
