Network summary (GCLAN)
GCLAN
provides a summary of all chromatographs
connected to the control unit. At the same time, it
summarizes operation, configuration and data
management.
GCLAN
shows the connected chromatographs in up to
three different types of display:
One chromatograph
Up to six chromatographs
More than six chromatographs.
Starting GCLAN
GCLAN
enters itself into the file
BEDI.BAT
when it is
installed. The network summary then always appears
when you start operation as usual. Also refer to Regis-
ter 2,
The software: Starting the operating software
.
Leaving GCLAN
Press if you wish to return to
MS-DOS
.
The control unit asks whether you really wish to leave
GCLAN
. Reply using .
Permanent display of last result
If only one chromatograph is displayed on the screen,
its last result is shown on the right. If several chromato-
graphs are connected to the control unit, press the key
until the display
Results
is output.
Selection of channel A/B
If you wish to see the last result of the other channel,
press one of the cursor keys .
Network summary
F2: RETURN
Y
TAB
CURSOR UP/DOWN
Network summary
4
5GCLAN.CHP, Stand Dezember 22, 1999
To Next Page
Loading...
