Print chromatogram and
results following each run
From software version V6.0 onwards, the chroma-
togram and the results can be printed together:
automatically following each run or manually. It is
possible to define the measuring ranges, chart drive
and baseline offset for the chromatogram using a
special time events program.
The result is printed with a fixed format. This has noth-
ing to do with the
BASIC
program REPORTA.BAS. You
should not use this
BASIC
program in the time events
program of course if you have switched on automatic
printing.
Installation
Printing is carried out using the TSR program CPRINT.
The installation program enters the line
CPRINT
into the file BEDI.BAT if you define that you wish to
automatically print the chromatogram and results.
Hardware requirements
386 computer or better with 25 MHz and 1 MB
main memory
Printer with
IBM
-compatible character set. Use a
high-speed printer for several chromatograms or a
fast chart drive.
Switching
the automatic printing on or off
Select the function Raw data/Print in the selection dis-
play. Move the cursor to Print result or Print chromato-
gram for the desired channel. Press
or .
NOTE:
Chromatograms can only be printed together with the result. If
you switch on
Print chromatogram
,
Print results
is also
switched on! Vice versa,
Print chromatogram
is also switched
off if you switch off
Print results
.
F9: Enable transmiss. F10: Disable trasmiss.
Print chromatogram and results
22
5CHRODRU.CHP, Stand Dezember 22, 1999
To Next Page
Loading...
