Further useful information
It is not essential to read this page, but perhaps you
wish to know more ...
Selection of the raw data file
Selection of the raw data files for reintegration is car-
ried out e.g. from the directory \pgcarch\gc0101\ .
There are many files there for each channel such as
RC0101A.004 or RC0101B.012 and a file
RC0101A.MAN. The latter is generated when the cur-
rent chromatogram is saved from the chromatograph.
Further files are produced!
Once you have selected a raw data file, the operating
software converts the selected file into
\pgcarch\RS0101A.I00 and \pgcarch\RA0101A.I00 (the
latter only with an internal standard).
The operating software then starts the reintegration.
The reintegration always uses the two above-mentioned
files and generates a new report file
\pgcarch\gc0101\RP0101A.I00 and a new chromato-
gram file \pgcarch\gc0101\RD0101A.I00 from these.
These two files are only present once per chromato-
graph. They are required for viewing and printing.
Save the result of reintegration?
Saving the two generated files RD0101A.I00 and
RP0101A.I00 is really unnecessary since the raw data
file already exists. This can be used to repeatedly
generate a report and a chromatogram.
If you nevertheless wish to save, you must individually
save the two generated files RD0101A.I00 and
RP0101A.I00 following each reintegration.
Reintegration
5REINTE.CHP, Stand Dezember 22, 1999
21
To Next Page
Loading...
