EG conformity certificate
The master of the EG conformity certificate can be con-
sulted at:
Siemens AG
AUT 362
D-76181 Karlsruhe
Conformity certificate
Contents of EG conformity certificate
This chromatograph has been developed and manufac-
tured in line with
89/336/EWG
Guideline for electromagnetc comaptibility
(changed by 91/263/EWG, 92/31/EWG and
93/68/EWG)
73/23/EWG
Guideline for voltage limits in use of electrical
equipment (changed by 93/68/EWG)
The following international standards are applied:
EN 50081-1
EN 50082-2
EN 61010
Safe electrical isolation
The low-voltage circuits are isolated safely from the
power supply circuits. The chromatograph has been de-
signed according to DIN VDE 0100, Part 410: Protec-
tive measures, Protection against dangerous shock cur-
rents, in particular Section 4.3.2 Functional extra-low
voltage with safe isolation.
The chromatograph complies with the requirements of
DIN VDE 0106, Part 101: Protection against dan-
gerous shock currents, Basic requirements for safe iso-
lation.
Explosion protection
Explosion-proof chromatographs have been designed in
accordance with:
EN 50014: 1977 + A1 ... A5 General regulations
EN 50016: 1977 + A1 Pressurized enclosure p
EN 50018: 1977 + A1 ... A3 Flameproof enclosure d
EN 50019: 1977 + A1 ... A3 Increaseded safety e
Refer to the conformity certificate in Register 14.
Recommendation
You retain this status and guarantee danger-free oper-
ation if you observe the information and warnings in
this manual.
Conformity certificate
1SICHERH.CHP, Stand Dezember 22, 1999
3
To Next Page
Loading...
