Description
Spare parts list PGC 302 edition II
Order no.
1.
Basic equipment
1.1
Housing
1.1.1.1 Temperature limiter, 60°C W79086-D3-A60
1.1.1.2 Axial fan, 24V C79451-A3404-B218
1.2
Oven
1.2.1
Heating of oven
1.2.1.1 Heating cartridge 115V :˝230V: 2 in serie 115V: 2 in parallel W75083-A1001-F115
1.2.1.2 Measuring resistor Pt100 W75085-C1011-X
1.2.2
Temperature limiter
1.2.2.1 Temperature limiter, 120°C W75086-D1-A120
1.2.2.2 Temperature limiter, 185°C W75086-D1-A185
1.2.2.3 Temperature limiter, 280°C W75086-D1-A280
2.
Injection valves
2.1
Liquid injection valve
2.1.1
Liquid injection valve (LIV) standard version
2.1.1.1 Liquid injection valve, standard type,˝injection volume 0,6µl C79451-A3114-B33
2.1.1.2 Liquid injection valve, standard type,˝injection volume 2,4µl C79451-A3114-B34
2.1.1.3 Piston with injection tappet, stainless steel,˝with bore 0.6µl C79451-A3114-B40
2.1.1.4 Piston with injection tappet, stainless steel,˝with bore 1.0µl C79451-A3114-B42
2.1.1.5 Piston with injection tappet, stainless steel,˝with bore 2.4µl C79451-A3114-B43
2.1.1.6 Piston with injection tappet, stainless steel,˝with bore 5.3µl C79451-A3114-B44
2.1.1.7 Piston with injection tappet, stainless steel,˝with bore 9.5µl C79451-A3114-B45
2.1.1.8 Vaporizer for liquid injection valve C79451-A3114-B26
2.1.2
Liquid injection valve (LIV) for deep injection
2.1.2.1 Liquid injection valve, deep injection,˝SS, injection volume 0,6µl C79451-A3364-B27
2.1.2.2 Piston with injection tappet, deep injection˝SS, with grooved ring 0.6µl C79451-A3114-B47
2.1.2.3 Piston with injection tappet, deep injection˝SS, with grooved ring 1.5µl C79451-A3114-B48
2.1.2.4 Piston with injection tappet, deep injection˝SS, with grooved ring 2.4µl C79451-A3114-B49
2.1.2.5 Piston with injection tappet, deep injection˝SS, with notch 0.4µl C79451-A3364-B44
2.1.3
Liquid injection valve with deep injection and glass vaporizer
2.1.3.1 Liquid injection valve, deep injection,˝glass vaporizer 0,6µl C79451-A3364-B27
2.1.3.2 Piston with injection tappet,˝SS, with grooved ring 0.6µl C79451-A3114-B47
2.1.3.3 Piston with injection tappet,˝SS, with grooved ring 1.5µl C79451-A3114-B48
2.1.3.4 Piston with injection tappet,˝SS, with grooved ring 2.4µl C79451-A3114-B49
2.1.3.5 Piston with injection tappet,˝SS, with notch 0.4µl C79451-A3364-B44
2.1.3.6 Glass vaporizer tube C79451-A3364-C67
2.1.4
Spares for all liquid injection valves (LIV)
2.1.4.1 Sample passage part,˝connector: Swagelok 1/8" C79451-A3114-B46
2.1.4.2 Set O-rings for liquid injection valve : 10off small, 20off large C79304-A3000-D3
2.1.4.3 Set: 20 lenticular gaskets for LIV, up to 60°C C79304-A3000-D4
2.1.4.4 Set: 20 lenticular gaskets for LIV, 60 - 200°C C79304-A3000-D5
2.1.4.5 Set: 20 lenticular gaskets for LIV,˝200°C - 450°C C79304-A3000-D6
2.1.4.6 Heating cartridge, 230V W75083-A1001-D230
2.1.4.7 Heating cartridge, 115V W75083-A1001-D115
2.1.4.8 Measuring resistor Pt100 W75085-C1010-X
2.1.4.9 Temperature limiter, 120°C W75086-D1-A120
2.1.4.10 Temperature limiter, 185°C W75086-D1-A185
2.1.4.11 Temperature limiter, 280°C W75086-D1-A280
Ersatz3e.xls
9
To Next Page
Loading...
