Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
SCALANCE X-200
Operating Instructions, 12/2011, A5E00349864-19
179
6.3.5.9 The "System Passwords" WBM menu
System Passwords
In this dialog, if you are the administrator, you can change the passwords for Admin and
User. The password can be up to a maximum of 16 characters (7-bit ASCII) long.
You apply your settings with "Set Value".
Note
Default pa
ssword when supplied
For Admin: admin
For the user: user.
Figure 6-15 "System Passwords" dialog
Table 6- 9 System Passwords - CLI\SYSTEM>
Command Description Comment
password <admin ¦ user>
<password>
Sets a new password for the
user or administrator.
Administrator only.
To Next Page
Loading...
