Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
SCALANCE X-200
200 Operating Instructions, 12/2011, A5E00349864-19
6.3.5.21 The "Agent SNMP Config Group Table" WBM menu
Agent SNMP Configuration Group Table
If you want to create a new SNMPv3 user group, this dialog appears:
Figure 6-26 Agent SNMP Configuration Group Table dialog
Group Name
Enter the name of the SNMPv3 group you want to create here.
Security Level
Here, you set the required security level for the group you are creating.
To Next Page
Loading...
