EasyManuals Logo

Siemens SCALANCE X-200 User Manual

Siemens SCALANCE X-200
296 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #196 background imageLoading...
Page #196 background image
Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
SCALANCE X-200
196 Operating Instructions, 12/2011, A5E00349864-19
Write Community String
Displays the user name for write access to SNMP variables. Here, changes can only be
made, when write protection (SNMP read only) has been disabled.
Traps
Here, you can enable or disable the sending of SNMP traps.
Syntax of the Command Line Interface
Table 6- 16 Agent SNMP Configuration - CLI\AGENT\SNMP>
Command Description Comment
info Displays information on SNMP.
snmp [A | 3 | D] Enables either [A] all SNMP versions or [3] only
SNMPv3 or [D] disables SNMP.
Administrator only.
readonly Enables / disables SNMPv1 read only mode. Administrator only.
getcomm [string] Specifies the Read Community string. Administrator only.
setcomm [string] Specifies the Write Community string. Administrator only.
traps [E ¦ D] Enables / disables SNMPv1 traps. Administrator only.

Table of Contents

Other manuals for Siemens SCALANCE X-200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SCALANCE X-200 and is the answer not in the manual?

Siemens SCALANCE X-200 Specifications

General IconGeneral
BrandSiemens
ModelSCALANCE X-200
CategorySwitch
LanguageEnglish

Related product manuals