Siemens SCALANCE X-200 - Page 215

Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
SCALANCE X-200
Operating Instructions, 12/2011, A5E00349864-19
215
Command Description Comment
speed <port> [10¦100¦A] Specifies the port speed:
 10 - 10 Mbps
 100 - 100 Mbps
 A - Autonegotiation.
If autonegotiation is set, the setting applies for
speed and duplicity.
Administrator only.
duplex <port> [H¦F¦A] Specifies the port duplexity:
 H - half
 F - full
 A - autonegotiation
If autonegotiation is set, the setting applies for
speed and duplicity.
Administrator only.