PROFINET IO functionality
8.1 Configuring with PROFINET IO
SCALANCE X-200
246 Operating Instructions, 12/2011, A5E00349864-19
Figure 8-1 PN IO setup of the station
Including the IE Switch X-200
To include the individual X-200 IE switches as PN IO devices, the IE Switch X-200 must
exist in the module catalog under PROFINET IO. If this is not the case, the X-200 IE
switches must be included by linking the supplied GSDML file in the module catalog.
A device name can then be assigned.
To Next Page
Loading...
