Siemens SCALANCE XC-200 Set Up And Configuration

3 Configuration and commissioning of the Service Bridge
Service Bridge – Setup and Configuration
Entry ID: 109747975, V1.4, 05/2019
19
 Siemens AG 2019 All rights reserved
Changing the password
After the first login, a prompt will ask you to change the default password of the
admin user.
1. Enter the current password (1).
2. Enter a new password (2).
3. Click the "Set Values" button (3) to confirm the settings.
1
2
3
Note
The new password must conform to the following guidelines:
 Password length: a minimum of 8 characters, a maximum of 128 characters
 At least 1 upper case letter
 At least 1 special character
 At least 1 digit
Checking the firmware version
1. Navigate to the "Information > Versions" menu (1)(2).
2. Check whether the firmware version is at least V4.0 ("V04.00.00") (3).
1
2
3

Siemens SCALANCE XC-200 Specifications

General

Brand	Siemens
Model	SCALANCE XC-200
Category	Switch
Language	English