3 Configuration and commissioning of the Service Bridge
Service Bridge – Setup and Configuration
Entry ID: 109747975, V1.4, 05/2019
Siemens AG 2019 All rights reserved
Updating the firmware version
If the firmware version of the switch is lower than V4.0, follow the steps below to
update the firmware:
3. Navigate to the "System > Load&Save" menu (1)(2).
4. Click on the "Load" button (3).
5. A dialog box for uploading the firmware file opens. Select the firmware file and
upload it.
6. After successfully uploading the firmware, the Service Bridge needs to be
restarted.
Confirm the restart dialog by clicking on "OK".