Siemens SCALANCE XC-200 Set Up And Configuration

3 Configuration and commissioning of the Service Bridge
Service Bridge – Setup and Configuration
Entry ID: 109747975, V1.4, 05/2019
34
 Siemens AG 2019 All rights reserved
25. In the Service Bridge address range, configure an unallocated IP address with
its respective subnet mask (1). This is also needed for accessing the Web
Based Management (WBM) and for enabling/disabling ports. Then click on the
"Advanced…" button to open the advanced settings (2).
1
2

Siemens SCALANCE XC-200 Specifications

General

Brand	Siemens
Model	SCALANCE XC-200
Category	Switch
Language	English