Siemens SENTRON 3WA1 - Position Signaling Switch Module for Connection to the Communication Module; Description; Article Number

Accessories
4.15 Communication interface
3WA1 air circuit breaker
382 Equipment Manual, 02/2023, 92310000002-06
4.15.3 Position signaling switch module for connection to the communication
module
4.15.3.1 Description
Note
The position signaling switch modules are described in Chapter Position signaling switch
module for guide frame (Page
274). Only the communications link is described here.
The PSS COM position signaling switch module has two signaling switches for
connection to communications module A. This allows the following items to be
transferred via the communication system:
• Disconnected position
• No circuit breaker in the guide frame
(1)
Position signaling switch module
(2)
Signaling switches for connection to communications module A
• DISC ... Disconnected position S48
• ABS ... No circuit breaker in the guide frame (absent) S49
(3)
Signaling switches for conventional method of connection (floating contacts)
• Disconnected position S30
• Test position S31
• Connected position S34
You will find more information in the operating instructions available on the internet
(https://support.industry.siemens.com/cs/ww/en/view/109783663
).
4.15.3.2 Article number
You can find the article number in Chapter Position signaling switch module for guide
frame (Page 274).