Siemens SENTRON 3WA1 - Mounting Adapter for Cubiclebus² Modules; Description; Article Number

Accessories
4.15 Communication interface
3WA1 air circuit breaker
384 Equipment Manual, 02/2023, 92310000002-06
4.15.5 Mounting adapter for CubicleBUS² modules
4.15.5.1 Description
CubicleBUS
2
modules are installed with an adapter on the circuit breaker or on a 35 mm
DIN rail in the secondary compartment of the power distribution equipment.
The mounting adapters are included in the scope of supply of the modules. Both versions
of the mounting adapter can also be ordered separately as an accessory.
You will find more information in the operating instructions available on the internet
(https://support.industry.siemens.com/cs/ww/en/view/109792563
).
4.15.5.2 Article number
Mounting adapter for CubicleBUS
2
modules
Article number
For the secondary disconnect terminal system
3WA9111-0EC60
For DIN rail mounting
3WA9111-0EC61
You can purchase the accessories in the Siemens Industry Mall
(http://www.siemens.com/product?3WA9111-0EC6*).