Technical data
11.1 Technical data
SENTRON PAC3100
Manual, 07/2009, A5E02385159B-01
111
Dimensions and weights
Type of fixing Panel mounting to IEC 61554
Housing dimensions W x H x D 96 mm x 96 mm x 56 mm
Cutout (W x H) 92
+0.8
mm x 92
+0.8
mm
Overall depth 51 mm
Permissible switching panel thickness for
installation
≤ 4 mm
Mounting position Vertical
Weight
Device without packaging Approximately 325 g
Device including packaging Approximately 460 g
Degree of protection and protection class
Protection class Protection class II when installed
Degree of protection according to IEC 60529
Device front IP65
Type 5 enclosure acc. to UL50
Device rear IP20
If higher degree of protection requirements are placed on the application engineering, the
customer must take suitable measures
Environmental conditions
The device is suitable for switch panel mounting in accordance with IEC 61554. Operation is
only permissible inside an enclosed dry room.
Temperature range
Ambient temperature during operating
phase
- 10 °C to + 55 °C
Ambient temperature during transport
and storage
- 25 °C to + 70 °C
Relative humidity 95% at 25°C without condensation (normal
conditions)
Installation altitude above sea level max. 2000 m
Degree of pollution 2
Environmental tests In accordance with IEC 60068
To Next Page
Loading...
