Siemens SENTRON PAC3100 - Display of the Device Settings; Table 8- 3 Assignments of the Function Keys in the Device Settings Display

Operator control
8.1 Device interface
SENTRON PAC3100
Manual, 07/2009, A5E02385159B-01
75
8.1.5 Display of the device settings
Related device settings are listed under the display title. The currently valid settings are
visible.

 D  E  F

 D
 D
 E
(1) Display title
a) Designation of the selected group of device settings
b) Device protection symbol
c) Display number of the device setting
(2) List of device settings
a) Selection bar
b) Current setting
(3) Function keys
a) Key labeling
Figure 8-10 Display of the device settings
Display title
Specifies which group of device settings is currently selected.
Function keys
Table 8- 3 Assignments of the function keys in the device settings display
Key function F1 F2 F3 F4
Return to the menu selection
Scroll up in the selection list
Scroll down in the selection list
Change to edit mode
Switch the setting ON/OFF
Return to the menu selection