Appendix
A.1 Measured variables
SENTRON PAC3100
124 Manual, 07/2009, A5E02385159B-01
Designations of the measured variables on the display
Table A- 2 Designations of the measured variables on the display
Measured variable Designations of the measured variable in the Display
Display title Main menu Number
Voltage ph-n Vph-n VOLTAGE 1.0
Voltage ph-ph Vph-ph VOLTAGE 2.0
Current AMPS CURRENT 3.0
Neutral current In CURRENT N-
CONDUCTOR
4.0
Apparent power per phase VA APPARENT POWER 5.0
Active power per phase P ACTIVE POWER 6.0
Reactive power (VAR1) per phase Q1 REACTIVE POWER 7.0
Collective power values:
Total apparent power over all phases
Total active power over all phases
Total reactive power VAR1 over all phases
TOTAL VA, W, VAR1 TOTAL POWER 8.0
Total power factor TOTAL PF TOTAL POWER FACTOR 9.0
Line frequency FREQUENCY FREQUENCY 10.0
Active energy
Reactive energy
ENERGY ENERGY 11.0
Device settings SETTINGS SETTINGS 20.1
Designations of the measured value properties on the display
Table A- 3 Designations of the measured value properties on the display
Designation of the measured value property Measured value property of the measured variable
INSTANTANEOUS Measured instantaneous value
MAXIMUM Measured maximum value
MINIMUM Measured minimum value
AVERAGE Calculated average value
To Next Page
Loading...
