Siemens SENTRON PAC3100 - Operator Input Steps in the MAIN MENU

Operator control
8.2 Steps
SENTRON PAC3100
78 Manual, 07/2009, A5E02385159B-01
Reset the maximum or minimum value to the instantaneous value
F3 resets the last reached maximum/minimum value to the instantaneous value.
Figure 8-12 Reset the maximum or minimum value to the instantaneous value
Calling the "MAIN MENU"
F4 calls the menu selection. The selection bar is at the last displayed measured
variable in the menu selection.
Figure 8-13 Calling the "MAIN MENU"
See also
Operator input steps in the "MAIN MENU" (Page 78)
8.2.2 Operator input steps in the "MAIN MENU"
Selecting the measured variable
The selection bar highlights the currently selected menu entry (white text on a black
background).
F2
moves the selection bar up in the menu list.
F3
moves the selection bar down in the menu list.
Note
Selecting the measured variable
In the measured value display, you can switch to other measured value displays without
calling the main menu.