Siemens SENTRON PAC3100 - Figure 7-2 SETTINGS Menu; Figure 7-3 LANGUAGE Edit Mode

Commissioning
7.3 Parameterizing the device
SENTRON PAC3100
54 Manual, 07/2009, A5E02385159B-01
Select the desired language by pressing <F2> or <F3> .
Apply the desired language with <F4>
.
Changing the language
1. Exit the measured value display and call the "MAIN MENU":
<F4>
2. In the main menu, go to the "SETTINGS" entry:
<F2>
or <F3>
3. Call the "SETTINGS" entry:
<F4>
4. In the "SETTINGS" menu, go to the "LANGUAGE/REGIONAL" entry:
<F2>
or <F3>
Figure 7-2 "SETTINGS" menu
5. Call the "LANGUAGE/REGIONAL" entry:
<F4>
The display shows the currently valid settings.
6. Open edit mode of the "LANGUAGE" device setting:
<F4>
Figure 7-3 "LANGUAGE" edit mode
7. Scroll through the possible values with:
<F2>
8. Accept the desired language with:
<F4>
The language is permanently saved and becomes effective immediately.
The display returns to display mode.
9. Return to one of the selection menus or to the measured values display:
<F1>