Description
3.2 Measuring inputs
SENTRON PAC3100
20 Manual, 07/2009, A5E02385159B-01
Overload display
Voltage or current overload are indicated on the display:
Figure 3-3 Indicating overload on the display
The display shows the message "... OUT OF RANGE". The message can be confirmed and
hidden with function key <F4>.
Figure 3-4 Display of the measurable maximum value at overload
The character ">" and the measurable maximum value (physical measuring range multiplied
by scaling) are displayed instead of the measured values for affected phases.
The symbol
in the header indicates overload. The symbol can be seen in all measured
value displays.
Current direction
The current direction can be changed on the device for all phases individually. It is not
necessary to change the terminal connections of the current transformers in the event of
connection errors.
See also
Connection examples (Page 45)
Setting the connection type (Page 55)
Connection (Page 39)
Applying the measuring voltage (Page 60)
Applying the measuring current (Page 61)
To Next Page
Loading...
