Parameterizing
9.2 Parameterizing the operator interface
SENTRON PAC3100
Manual, 07/2009, A5E02385159B-01
93
TIME UNTIL DIMMED Time after which the device switches off the backlighting.
Range: 0 to 99 min.
0 = Backlighting remains switched on
Default value: 3 min.
INVERT DISPLAY Inversion of the basic representation of the display.
ON/OFF switch:
ON / OFF.
OFF: Light text on dark background.
ON: Dark text on light background.
Default value:
ON.
REFRESH TIME Refresh rate of the display.
Range: 330 to 3000 ms
Default value: 330 ms.
The tolerance of the refresh rate is 100 ms.
DISPLAY TEST Screen for testing the functional capability of the display.
Key F3 inverts the test screen.
Key F4 closes the display.
9.2.10 Advanced
Call: "SETTINGS > ADVANCED".
Other device settings.
● Password protection
● Resetting of minimum/maximum values, counters, and communication parameters
Figure 9-10 "ADVANCED" device setting
PASSWORD PROTECTION
You can protect the device settings against write access with a password. The data can be
read without any restrictions.
PASSWORD PROTECTION Switches password protection ON / OFF.
ON: Password protection switched
on
OFF: Password protection switched
off
Default value: switched off
To Next Page
Loading...
