Siemens SENTRON PAC4220 - Page 108

Connection components: Digital inputs and outputs
2-wire, same cross-section Rigid
0.14... 0.75mm
2
(AW
G26 ... 19)
Flexible
0.14... 0.75mm
2
(AW
G26 ... 19)
Flexible with end sleeve, without plastic
sleev
e
0.25... 0.5mm
2
(AW
G24 ... 20)
Flexible with TWIN end sleeve and plastic
sleev
e
0.5... 1mm
2
(AW
G20 ... 18)
Tightening torque 0.5... 0.6Nm
(4.4 ... 5.3lb‑in)
Dimensions and weights
Type of 󹪝xing Panel mounting to IEC61554
Size W x H x D 96mmx96mmx56mm
Cutout (W x H) 92
+0.8
mm x 92
+0.8
mm
Mounting depth (without expansion module) 51mm
Permissible control panel thickness for installation ≲4mm
Mounting position Vertical
Weight
 Device without packaging Approx.325g
Device including packaging Approx.460g
Degree of protection and safety class
Safety class Protection classII when installed
Degree of protection according to IEC60529
 Device front IP65
Device rear IP20
If a higher degree of protection is required for a speci󹪝c application, t
he cus
tomer must take suitable measures.
Technical data
9.1PAC4220 technical data
PAC4220
106 Equipment Manual, L1V30827278B-01