Operation
6
6.1 Device interface
Displa
y
s and operator controls
The front of the PAC4220 contains the following displays and operator controls.
① Display area:
Represents the current measured values, device settings and selection menus.
② Header area:
Species the inf
ormation visible in the display area.
③ Multicolored LED:
Wor
ks like a normal digital output. Function and color can be congured by the user.
④ Footer area:
Species the functions as
signed to the function keys.
⑤ Surfaces of the function keys:
The k
eys have multiple assignments. Function assignments and key labeling change according to
the context of operator input. The designation of the current key function can be seen above the
key number in the footer area of the display. A short press on the key triggers the function once.
Holding the key down for longer switches on the autorepeat function after approximately 1 sec‐
ond. The function of the key is triggered repeatedly while the key is held down. Autorepeat is
useful, for example, for fast incrementing of values when parameterizing the device.
PAC4220
Equipment Manual, L1V30827278B-01 65
To Next Page
Loading...
