Siemens SENTRON PAC4220 - 7.1.5 Communication

Selection

Range Factory setting
TIME ZONE Time zone, refers to coordinated universal time (UTC).
−12:00 ... +14:00, in 30-minut
e int
ervals
00:00
DAYLIGHTSAVING Automatic time change AUTO EU
7.1.5 Communication
You con󹪝gure t
he communication interface in this menu.
If you exit the "COMMUNICATION" device setting with the F1key, the device asks if you want
to restart.
Selection

Range Factory setting
MAC MAC address. Read only. -
IP address Manual setting of the IP address is only possible when DHCP is
deactivat
ed.
Format: 000.000.000.000
-
Subnet Manual setting of the subnet is only possible when DHCP is
deactivat
ed.
Format: 000.000.000.000
-
Gateway Manual setting of the gateway is only possible when DHCP is
deactivat
ed. In the case of data exchange with an IP address
which is not in the home subnet, the data can be transmitted
via a gateway. The gateway interconnects di󹪜erent networks.
Format: 000.000.000.000
-
DHCP (Dynamic Host Con󹪝guration Pr
otocol)
If DHCP is activated, network con󹪝gurations are automatically
assigned. This enables automatic integration of devices in an
existing network.
If DHCP is activated, network con󹪝gurations cannot be adjus‐
ted manually.
ON
Parameterizing
7.1Parameterizing via the operator interface
PAC4220
84 Equipment Manual, L1V30827278B-01