Siemens SENTRON PAC4220 - 7.1.4 Date;Time

Selection

Range

Factory setting
DISPLAY RANGE Resolution of current indication
F
r
eely adjustable
1A ... 99999A
50A
• CURRENT DIRECL1
• CURRENT DIRECL2
•
CURRENT DIRECL3
Inverse evaluation of the current 󹪞ow direction separately for
each phase.
•
ON: Direction of current 󹪞ow
is inverted. The device
interprets the current 󹪞ow direction opposite to the wiring.
•
OFF: The device interprets the current 󹪞ow
direction in
accordance with the wiring.
OFF
Minimum current
Selection

Range

Factory setting
MEASUREMENT Zero point suppression as a percentage of the primary rated
cur
r
ent of the external current transformer:
The minimum current measurement is used for
zero point suppression so that zero is displayed below this
limit.
0 ... 10%
0.0%
7.1.4 Date/time
You se
t the date and time in this menu.
Selection

Range Factory setting
DATE Current date
The date format is de󹪝ned in the FORMAT 󹪝eld.
-
TIME HH:MM:SS -
Parameterizing
7.1Parameterizing via the operator interface
PAC4220
Equipment Manual, L1V30827278B-01 83