Siemens SENTRON PAC4220 - 2.11 Slots for Expansion Modules

2.11 Slots for expansion modules
The PA
C4220 has 2 identical slots (MOD1 and MOD2) for installing optionally available
expansion modules.
The following expansion modules
1)
are available:
• 7KM PROFIBUS DP expansion module (7KM9300-0AB01-0AA0)
• 7KM RS485 expansion module (7KM9300-0AM00-0AA0)
• 7KM 4DI/2DO expansion module (7KM9200-0AB00-0AA0)
• 7KM I(N), I(Di󹪜), expansion module, analog (7KM9200-0AD00-0AA0)
• 7KM Switched Ethernet PROFINET expansion module (7KM9300-0AE02-0AA0)
1 expansion module can be operated alone on the device or 2 expansion modules
simultaneously.
Note
Using 7KM PROFIBUS and 7KM 4DI/2DO e
xpansion modules
Operating the PAC4220 Power Monitoring Device in conjunction with 7KM PROFIBUS or 7KM
4DI/2DO expansion modules can cause radio frequency interference in residential areas.
The 7KM PROFIBUS and 7KM 4DI/2DO expansion modules comply with the EMC emission limits
in accordance with EN55032 (Class A).

(1) Slot MOD1
(2) Slot MOD2
Description
2.11Slots for expansion modules
PAC4220
36 Equipment Manual, L1V30827278B-01