Siemens SENTRON PAC4220 - 6.1.5 Setting Level; 6.1.6 Editing Level; 6.1.7 Control Keys

6.1.5 Setting level
At
the setting level, the device can be con󹪝gured. All settable parameters are listed at this menu
level.
• The key returns the device to the main menu lev
el.
• The
and keys can be used to scroll through the settable parameters.
• The key con󹪝rms the r
equired selection and takes the device to the editing level.
6.1.6 Editing level
You can change device parameters in the editing level.
• The
key returns the device to the setting level.
• The and keys can be used to navigate to the value to be changed.
• The or key can be used to select a value for editing.
• The and keys, or and keys are used to alter the value.
• The key con󹪝rms the c
hange and switches the device to the measured value level.
6.1.7 Control keys
The device can be operated by means of four keys. The keys are assigned di󹪜erent functions. The
functions of the keys depend on the menu level currently in use.
Keys Possible assignment Meaning
Measured value level:
The user
uses this key to navigate to the next submenu. Additional
measured data for the selected measured value are displayed in the
submenu.
This key causes all inputs to be discarded and returns the device to
the las
t menu displayed. Any changes made but not con󹪝rmed are
not transferred to the system.
Operation
6.1Device interface
PAC4220
Equipment Manual, L1V30827278B-01 69