Siemens SENTRON PAC4220 - 2.8 Limit Values

2.8 Limit values
Note
This function will be a
v
ailable at a later time via a 󹪝rmware update.
The power monitoring device has a function for monitoring up to 12 limit values. These can
be monitor
ed for violation of the upper or lower limit.
In addition, the limit values can be combined with each other using a logic operation. The
result of the logic operation can also be used to trigger speci󹪝c actions in the same way as
the individual limit values.
The limit value violations are shown on the display or, depending on how the LEDs are
con󹪝gured, by the LEDs lighting up, 󹪞ashing or going out.
Description
2.8Limit values
PAC4220
Equipment Manual, L1V30827278B-01 33