Siemens SENTRON PAC4220 - Page 53

(5) 3-phase measurement, 3 conductors, unbalanced load, without voltage transformer,
with 3 curr
ent transformers
Connection type 3P3W
)

)

)

)


/D
/E
/F
,/
,/,/,/,/,/
/19

9

9

9
1
NONONO
1)
The fuses are only used for cable protection.
All commerciall
y available miniature circuit breakers up to 20A(C) can be used.
2)
Connection of supply voltage
3)
Install a short-circuit device. Protection against overvoltage when the secondary transformer
cir
cuit is open.
4)
Cir
cuit breaker
Figure4-5 Connection type 3P3W, without voltage transformer, with 3 current transformers
(6) 3-phase measurement, 3 conductors, unbalanced load, with voltage transformer,
with 3 curr
ent transformers
Connection type 3P3W
/D
/E
/F


)

)

)

)

)

)

)

,/
,/,/,/,/,/
/19

9

9

9
1
NONONO
1)
The fuses are only used for cable protection.
All commerciall
y available miniature circuit breakers up to 20A(C) can be used.
2)
Connection of supply voltage
3)
Install a short-circuit device. Protection against overvoltage when the secondary transformer
cir
cuit is open.
4)
Cir
cuit breaker
Figure4-6 Connection type 3P3W, with voltage transformer, with 3 current transformers
Connection
4.3Connection examples
PAC4220
Equipment Manual, L1V30827278B-01 51