9 Operation at Use of the Display
9.4 Parameterization
295SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
1)
These values are necessary if no Modbus slave device has been configured for the requested Unit ID. If
a Modbus slave device was configured, its values are used.
Table 9-9 Modbus TCP/RTU Gateway Settings
Parameter Default Setting Setting Range
Activated no no
yes
Unit ID of this device 255 1 to 255
Retry limit
1)
2 0 to 10
Response timeout
1)
50 ms (1 to 6 000) * 10 ms
= 10 ms to 60 s
To Next Page
Loading...
