Siemens SIMATIC 505 - Page 56

Software Interface
2-33
2.7.1
Bit 1
1 16 Description
[1... .... .... ....] End of profile at step #10
Bit 2
1 16 Description
[.1.. .... .... ....] End of profile before Step 10 due to
0 value in next step
Bit 3
1 16 Description
[..1. .... .... ....] Max time exceeded except for Pack and
Hold—then min position reached
Bit 4
1 16 Description
[...1 .... .... ....] Max pressure exceeded
Bit 5
1 16 Description
[.... 1... .... ....] Max
cavity pressure exceeded
Bit 6
1 16 Description
[.... .1.. .... ....] Fill
pressure reached
Bit 7
1 16 Description
[.... ..1. .... ....] Cure time reached
Bits 8–15 Reserved
Bit 16
1 16 Description
[.... .... .... ...1] Emergency
stop caused by forcing 0 into
word WY8 or WY7 ≠1121
Real-time Process
Status Bits for
W ords 12–16