Expanding and assigning parameters to the device
6.3 Expansion cards
SIMATIC IPC PX-39A
Operating Instructions, 08/2022, A5E51699601-AA
67
Reinsert the clamp and slide the clamp in
the direction indicated.
Secure the clamp with the corresponding
screw.
Close the device as specified in section "Open device with expansion slot (Page 63)".
Procedure - Removal
Proceed in reverse order of installation.
Configuring BIOS setup
You may need to make settings in the BIOS Setup. For detailed information about installation,
please refer to the documentation provided with the specific expansion card.
To Next Page
Loading...
